 |
|
|
 |
    |
|
 |
||
|
||
|
Prophecy CryoSilver™
Reference DualConduit™IEEE 1394 FireWire Digital Link cable |
||
Cable features deep cryogenic-treated 5N UltraPure solid silver conductors, air dielectrics, transparent pure PTFE Teflon isolators, discrete shielding for each pole within the array, and Ceramic MicroSphere™ Conduits, with independent power and signal cable runs. The FireWire cable employs an entirely new ground-breaking structure — DualConduit™ — separate cables for the power and signal lines. The cable actually has two design-specific cables. One cable conduit handles only the delicate digital music signal; no corrupted computer power runs through this cable leg. Its design is that of a ultra high-end digital audio cable. The other cable conduit handles only the DC power and power grounds; its design is that of an ultra high-end audio power cable — the digital music signal does not run through this cable leg. It is widely known that the radiated magnetic field and any radiated noise from power cables affects signal cables and corrupts the quality of the delicate music signal when a signal cable and a power cable are installed in parallel or are in close proximity with each other. However, virtually every FireWire cable available on the market has the signal line and power line in one cable together — we can clearly understand how sound quality is deteriorated by such architectures. Some high-end FireWire cables have independently shielded signal and power lines. This is an improvement, however, these two lines are in still parallel and in close proximity in the same cable and are constantly causing noise reflections inside the shieldings, which will significantly damage sound quality. The power supply lines in Firewire cables transmit a large amount of "noise" that is passed on from the power supply buss of the source equipment (computer). This "corrupted power" seriously degrades the quality of the digital music signal being transmitted and therefore, audio sound quality is greatly reduced. Although our previous design features discrete shielding for each conductor pole, which is superior to most cables on the market (a feature also included in this latest design), which addresses this issue and is vastly superior to the typical FireWire cable, our DualConduit™ design offers the ultimate in isolation of the signal lines from the power lines. Our latest-design FireWire cable is equipped with two independent cables consisting of a shielded structure with a 100% shielding effect obtained by using heavy solid and silver-plated copper stranded shields. This is the only FireWire cable which is successful in stopping noise interaction between the power and signal lines. 1.25-meter: $869 [FREE SHIPPING WORLDWIDE!] + $125 per 0.6-meter for longer cable 
|
 [ larger image coming soon] |
|
|
Prophecy CryoSilver™
Reference Power-Free FireWire cable– SINGLE CONDUIT FOR DIGITAL SIGNAL ONLY (no power) |
||
Same as our DualConduit™ FireWire cable above, but comprised of only the single digital signal conduit. This cable is specially designed to handle only the delicate digital music signal. This version omits the power conductors and connections all together. No corrupted computer power runs through this cable to your processor at all. This cable is ONLY for use with equipment that does not require power to be supplied from the source equipment (certain processors such as Weiss, etc.). A standard FireWire cable (i.e. all other FireWire cables) transfer power and signal. When you use this cable with equipment that does not need the FireWire cable to transfer power, the benefits and sonic improvements that are gained by using such a cable are utterly profound. Please confirm that your equipment does not need power to be transferred by the FireWire cable before you order this cable. 1.25-meter: $679 [FREE SHIPPING WORLDWIDE!]
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference DualConduit™USB 2.0 Digital Link cable |
||
Cables feature deep cryogenic-treated 5N UltraPure solid silver conductors, air dielectrics, transparent pure PTFE Teflon isolators, discrete shielding for each pole within the array, and Ceramic MicroSphere™ Conduits, with independent power and signal cable runs. The USB cable employs an entirely new ground-breaking structure — DualConduit™ — separate cables for the power and signal lines. The cable actually has two design-specific cables each with high-quality USB 3.0 Type A connectors for connection to your source. One Type A connector and cable handles only the delicate digital music signal; no corrupted computer power runs through this cable leg. Its design is that of a ultra high-end digital audio cable. The other Type A connector and cable handles only the DC power; its design is that of an ultra high-end audio power cable — the digital music signal does not run through this cable leg. On the other end of the "Y" shaped cable is a single high-quality USB 2.0 Type B connector that connects to your processor. It is widely known that the radiated magnetic field and any radiated noise from power cables affects signal cables and corrupts the quality of the delicate music signal when a signal cable and a power cable are installed in parallel or are in close proximity with each other. However, virtually every Firewire cable available on the market has the signal line and power line in one cable together — we can clearly understand how sound quality is deteriorated by such architectures. Some high-end USB cables have independently shielded signal and power lines. This is an improvement, however, these two lines are in still parallel and in close proximity in the same cable and are constantly causing noise reflections inside the shieldings, which will significantly damage sound quality. The power supply lines in USB cables transmit a large amount of "noise" that is passed on from the power supply buss of the source equipment (computer). This "corrupted power" seriously degrades the quality of the digital music signal being transmitted and therefore, audio sound quality is greatly reduced. Although our previous design features discrete shielding for each conductor pole, which is superior to most cables on the market (a feature also included in this latest design), which addresses this issue and is vastly superior to the typical USB cable, our DualConduit™ design offers the ultimate in isolation of the signal lines from the power lines. Our latest-design USB cable is equipped with two independent cables consisting of a shielded structure with a 100% shielding effect obtained by using heavy solid and silver-plated copper stranded shields. This is the only USB cable which is successful in stopping noise interaction between the power and signal lines. There is another profound benefit of the DualConduit design. For some processors — in particular processors that have their own internal power and therefore do not require USB power from the connected source (PC or Mac) to operate — the power leg may be required to begin the handshake between the DAC and the source, but once the USB driver has loaded, the power leg on these processors is no longer needed so you are free to entirely disconnect the power conduit. This means less noise from the PC or Mac, lower noise floor as a result. For those who have a limited number of available USB ports, the DualConduit™ USB cable is also available with a single Type A connector on the input end. Please specify. 1.25-meter: $799 [FREE SHIPPING WORLDWIDE!] + $125 per 0.6-meter for longer cable
|
 [ view larger image ] |
|
|
Prophecy CryoGlass™
Reference TOSLINK Digital Audio Optical Cable |
||
Handcrafted in the U.S.A. 470 strands of GLASS (not plastic) optical fiber, for high bandwidth audio applications. The connectors are all metal with perfectly polished glass contact surfaces. Connectors are electrically isolated from armored metal conduit jacketing. Clear protective covers protect the contact surfaces, keeping them dust-free when the cable is not installed. Made using the HIGHEST performance (stringent aerospace-spec) glass optical audio data glass fiber polished to a 1 micron optical finish. Flexible 5mm stainless steel (armored) jacket to preserve the integrity of the glass fibers in the harshest of environments. Finished with our durable abrasion-resistant and beautiful C.C.I.C. (Conductive Carbon Infused Composite) outer sleeving. 3-meter length - $1249.00 [FREE SHIPPING WORLDWIDE!]
E-mail for pricing on custom lengths, from 0.5-meter to 8-meter, as well as for high quality metal miniplug and ST connector options. Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details.
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference i2s Digital Link cable |
||
(For Perpetual Technologies, Audio Alchemy, Camelot, etc.) The first i2s digital audio cable designed specifically for lossless transfer of digital data, with zero-jitter introduction. Undisputedly the finest i2s cable available, widely acclaimed as the world's best. The custom-made Neutrik connectors are the finest available, employing a straight-through 5-pin male mini-DIN contact design to provide an extremely low reflection factor and excellent return loss characteristics. Connector pins are treated with Walker Audio Extreme SST Super Silver Treatment for improved conductivity and optimum signal transfer! The ruggedly handsome metal shell provides superb shielding. Precursor to our other designs, this is the cable that started it all; the technical achievements of the Prophecy are apportioned by all of our cable designs. 0.65-meter: $369 [FREE SHIPPING WORLDWIDE!] 1.25-meter: $439 [FREE SHIPPING WORLDWIDE!] Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details. + $59 per 0.6-meter for longer cable
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference True 75-ohm S/PDIF Digital Link cable |
||
True 75-ohm characteristic impedance. Employs WBT Nextgen™ Ag (silver) Signature RCA connectors - the first and only RCA connector designed to provide the required 75-ohm characteristic impedance for digital audio. Optional Furutech rhodium BNC connector. 0.65-meter: $649 [FREE SHIPPING WORLDWIDE!] 1.25-meter: $749 [FREE SHIPPING WORLDWIDE!] Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details. + $100 per 0.6-meter for longer cable
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference True 110-ohm AES/EBU Digital Link cable |
||
True 110-ohm characteristic impedance balanced. Featuring Swiss-made Neutrik XCC Series connectors - the world's first and only XLR connectors specifically designed for the most efficient and reliable transmission of digital audio signals. Further customization of this connector set is realized through employing non-standard silver contacts for metallurgical compatibility with our conductor material, and substituting the standard male shell for the HD-version non-magnetic stainless steel shell. 0.65-meter: $649 [FREE SHIPPING WORLDWIDE!] 1.25-meter: $749 [FREE SHIPPING WORLDWIDE!] Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details. + $100 per 0.6-meter for longer cable
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference CAT8+/RJ-45 i2s Ethernet Digital Link cable |
||
(For North Star Design, Accuphase HS-Link™, MSB, etc.) Completely new, updated design for 2018. Whereas our previous design is widely considered the gold standard, this revision takes performance to a whole new level. Deep cryogenic treated 5N pure solid core CryoSilver™ conductors, Big Air™ dielectrics, Mil. Spec. shieldings (solid and braided OFC). Finest ultra high quality premium German-made heavy cast solid metal shell connector. The connector is extremely effective at providing outstanding shielding characteristics, while its high mass reduces the unwanted affects of vibration, and is extremely rugged and well made for many years of trouble-free service, compared to the frail and delicate nature of typical low-cost RJ-45 connectors. The interior cavity is potted by our injection process with an aerospace dielectric compound, further reducing vibration and resonance, and increasing reliability through providing mechanical stress relief. Internal solderless terminations are treated with Walker Audio Extreme SST™ contact enhancer during cable fabrication. Ceramic MicroSphere™ conduit for dissipation of vibration and resonance. Anthony Perrotta of Perrotta Consulting, North American distributor for North Star Design, says our RJ-45 i2s Ethernet cable aptly outperforms the >$2K White Gold i2s cable commissioned by North Star Design. Also available in our unshielded version for applications where so recommended (such as with certain MSB units). 0.65-meter: $649 [FREE SHIPPING WORLDWIDE!] 1.25-meter: $749 [FREE SHIPPING WORLDWIDE!] Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details. + $100 per 0.6-meter for longer cable
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference i2s-enhanced Digital Link cable |
||
(For Sonic Frontiers, Muse, etc.) Premium Amphenol Mil Spec 13W3 connectors with gold pins and solid cast metal housing for superior EMI/RFI suppression. 0.75-meter: $1,059.00 [FREE SHIPPING WORLDWIDE!] Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details.
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™
Reference Neutrik CAT8+/RJ-45 Digital Link cable |
||
(For Zanden, etc.) 1.25-meter: $789 [FREE SHIPPING WORLDWIDE!] Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details. + $100 per 0.6-meter for longer cable
|
 [ view larger image ] |
|
|
Prophecy CryoSilver™ Reference HDMI cable |
||
World-class state-of-the-art design supported and highly recommended by Steve Nugent of Empirical Audio for use in i2s audio applications. The only HDMI cable we are aware of that employs solid silver conductors within air dielectrics. Performs splendidly with all audio equipment employing the HDMI format for digital audio signal transfer (i.e., PS Audio, etc.). 1.5-meter: $999
[FREE SHIPPING WORLDWIDE!] + $150 per 0.5-meter for longer cable For custom lengths, please e-mail or call us and we will send a PayPal invoice for the appropriate amount. Or, you may “manually” send the appropriate amount to our PayPal account brad@revelationaudiolabs.com and list the specific instructions in the “notes” section of the transaction.
Also, now accepting credit card and eCheck orders via phone, fax or mail; click for details.
|
 [ view larger image ] |
|
| ^ back to top |
||
|
© 2004-2022, Revelation Audio Labs, Inc. All rights reserved. | legal info |